Tag Archives: do-it-yourself

Vintage Charm Restored

July 10, 2017 by

As the saying goes, one woman’s trash is another woman’s treasure. Last year, I struck gold with two vintage chairs that I uncovered during a thrifting trip.

The find just goes to show how little things can bring the greatest joys in life. Looking at these chairs in the thrift shop, I could already see how to revive them with a little work and creative thinking.

Normally, I have a rule for thrifting: Always designate space for a piece of furniture before dragging it home. But these chairs were an exception. Home with me they came.

They sat in a spare bedroom until I decided how to incorporate them into my year-long Omaha Home room remodeling project.

With this particular installment of the project, I wanted to achieve a classic look (with a little glamour added, of course). That’s where the white and gold paint came into play for the color scheme.

Choosing the right fabric would either make or break the look I was trying to achieve. Just throwing any old material on them was not going to work. I wanted something timeless, classic, and durable enough to stand the test of time.

I have many different pieces I’m bringing together for this entire year-long project. Each component will bring something unique stylistically to the room. Don’t be afraid to mix and match different styles and textures; it adds more interest to the room.


There are several steps that you need to get right when staining or painting wooden furniture. These steps ensure that all of your hard work pays off, and you can then proudly display your piece. You cannot skip the important prepping steps.


Step 1—If you have a seat cushion on your chair, remove that first. Save the old fabric and cushion for later.

Step 2—Sand the chair until you remove all the glossy finish. This will allow the paint to better adhere to the chair.

Step 3—Use a tack cloth to remove all the sanded paint/material from the surface.

Step 4—Prime. I used a spray primer, which was easier to get in all of the detailed parts of this chair. Make sure each coat of primer is a light layer, almost dusting it. This way, your chair won’t suffer from paint runs. You may want to sand between coats if you are seeking a super-smooth finish. Also, using the correct paint is very important. Latex paint worked best for me.

Step 5—Use your hand sponge applicator to get your paint in all the hard-to-access areas and detailed spots. Once you have done this, you can take your foam roller to cover the entire piece. Go over the chair several times (or until you feel there is good coverage).

Step 6—If you are doing a detailed accent color, first make sure all your paint is dry. Then tape off the selected area and use a small brush for all detail work. I used what I had on hand—gold spray paint—but I sprayed it into an old cup and dipped my brush into that. You can also buy a small bottle from a craft store if you require a smaller amount.

Step 7 (optional)—Apply a top coat to seal the paint on the chair. I skipped this step and used a semi-gloss finish instead.

Step 8—Now for your cushion. Remove all the old staples from your chair cushion. You can use a flathead screwdriver and then pull them out with needle-nose pliers. Once the old fabric is off, determine if you need to replace the batting material or foam cushion. Mine was still intact, so I went to the next step.

Step 8—Cut out a piece of new fabric large enough that will wrap around the seat of your chair; leave about three inches of material (you will trim it off later). Or you can use the old piece of material as a template, allowing a few inches all the way around. Lay the seat cushion facedown on your material. Starting on one side, grab the material in the middle and wrap it around the cushion, pulling tightly, and place a staple in the middle.

Then do the opposite side, pulling tightly to the middle and placing a staple. Work your way around each side until you just have the corners left.

Step 9—Grasp one corner of your cover and pull the point toward the center of the seat cushion, staple. Arrange the remaining unstapled corner fabric into small even pleats, pulling tightly, and staple. Repeat this until all corners are complete. Make sure you don’t staple over the screw holes. At this point, you could add a piece of liner or dust cover (a dust cover is a black fabric that is generally seen under “store bought” chairs, concealing springs, nails, staples, etc.). Adding the dust cover is optional.

Step 10—Attach the cushion back on the chair, and you are done.

Note: I watched several tutorials for “chair restoration” and “chair refurbishment” on YouTube before beginning this vintage chair project. I suggest doing the same video tutorial research before beginning your own project as this can be very helpful. Good luck!


Two vintage chairs (or upholstered seat dining chairs), 1/2 yard fabric per seat cushion, and 1/2 lining per seat cushion

Scissors, tape measure, staple gun, staples, screwdriver, safety glasses

Sandpaper (in medium and fine grit)

Four cans of primer (I used Rustoleum Painters Touch 2X paint and primer), two cans per chair

One quart of latex paint (I used White Dove paint from Benjamin Moore elsewhere in the room, and Home Depot staff helped match the latex paint for the chairs)

Sponge roller

Several hand sponge applicators (different sizes)

One can gold spray paint (or a small bottle of gold paint from a craft store would suffice)

Fabric of choice

Sandy’s yearlong DIY remodeling series began with an introduction to the room in the January/February issue. The first of five projects, a coffee filter lamp, debuted in the March/April issue. Rustic wall vases followed in May/June. Stay tuned for the next installment. Visit readonlinenow.com to review back issues.

This article was printed in the July/August 2017 Edition of Omaha Home.

HomeSpun Gold

December 3, 2014 by
Photography by Bill Sitzmann

Every woman I know needs a place to throw her little trinkets. Whether they are sitting pretty on your bedside stand, or by the bathroom or kitchen sink to place your pretties in, these gold bowls can be both useful and attractive accents.

You will need a full weekend to finish these because of the drying process and the several steps needed. Once you have finished, though, you’ll be tickled with the results.


  • Balloons of different sizes. I used sizes 5, 9, and 12.
  • Foam brushes
  • Newspaper, which you cut or tear into smaller strips. I spent an hour 
  • tearing up an old phone book.
  • Mod Podge. I used the matte with the yellow label.
  • Gold Leaf or Composition Gold Metal Leafing Flakes
  • Gold Leaf Sealer
  • Your choice of paint. I used both a flat and gloss for the  outside coat.
  • Use any pencil with a new eraser for the dots.


  1. Start by applying the Mod Podge onto the strips right over a balloon.
  2. Be generous and continue until you have a thick base. Apply 15 to 20 layers. If you don’t get enough layers, it will be too thin, so apply more than you think necessary. Place balloons onto paper cups and let dry for approximately 24 hours.
  3. Pop the balloon and remove the latex.
  4. Trim the edges with a scissors down to the depth that suits your tastes. I like a shallow bowl. You don’t want them perfect; each one will be a little unique.
  5. Paint the entire bowl one color. I chose white. It may take a few coats.
  6. Once dry, take the gilding adhesive or gold leaf adhesive and apply a generous coat to the inside of the bowl and top rim. I let them stand for 15 minutes.
  7. Now for the best part: Start applying the gold leaf sheets or gilding strip to the bowl using a small soft brush, tapping it into place until its completing covered. This doesn’t take a long time, but it can be a bit messy.
  8. Apply another coat to give it a nice finished look. I chose a high gloss white and went right up to the gold rim. I then sealed it with a specific gold leaf sealer found at Hobby Lobby.
  9. You can choose to add the polka dots or leave it the way it is, looks great either way.
  10. To make the dots, use a regular pencil with an eraser on the end. Dip the eraser end into the paint, tap once on a paper towel to get most of the paint off, and then sketch onto the gold part in whatever pattern and amount you like.
  11. I then sealed them again with the spray sealer.

It’s a beautiful and homemade gift that will last for years to come!